Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-701001.png)
Oil Pressure Sender: Testing and Inspection
2GR-FE LUBRICATION: OIL PRESSURE SWITCH: INSPECTION
INSPECTION
1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Disconnect the oil pressure switch connector.
(b) Start the engine.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(d) Reconnect the oil pressure switch connector.
If the result is not as specified, replace the oil pressure switch assembly.