Highlander 4WD V6-3.5L (2GR-FE) (2008)
(a) Remove the clean air filter as shown in the illustration.
4. REMOVE AIR INLET SERVO MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and air inlet servo motor sub-assembly.
5. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and front blower motor sub-assembly.
Reassembly
AIR CONDITIONING: BLOWER UNIT: REASSEMBLY
REASSEMBLY
1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Install the front blower motor sub-assembly with the 3 screws.
2. INSTALL AIR INLET SERVO MOTOR SUB-ASSEMBLY
(a) Install the air inlet servo motor sub-assembly with the 3 screws.
3. INSTALL CLEAN AIR FILTER