Highlander 4WD V6-3.5L (2GR-FE) (2008)
(c) Move the hook connector in the direction indicated by the arrow in the illustration.
(d) Insert the pipe joint into the fitting hole securely and tighten the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(e) Install the bolt [A].
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(f) Install the screw [B].
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(g) Install the rear air conditioning tube and accessory assembly with the screw [C].
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(h) Install the packing.
9. INSTALL REAR AIR OUTLET CONTROL SERVO MOTOR SUB-ASSEMBLY
(a) Using the reference point, install the rear air outlet control servo motor sub-assembly with the 2 screws.
(b) Connect the connector.
10. INSTALL REAR AIR MIX CONTROL SERVO MOTOR SUB-ASSEMBLY