Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-2720001.png)
Door Switch: Testing and Inspection
Back Door Courtesy Switch
LIGHTING: BACK DOOR COURTESY SWITCH: INSPECTION
INSPECTION
1. INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
(a) Check the operation of the back door courtesy switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not specified, replace the back door lock assembly.
2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
(a) Check the operation of the back door courtesy switch.
