Highlander 4WD V6-3.5L (2GR-FE) (2008)
6. FULLY TIGHTEN NO. 1 SURGE TANK STAY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation
7. FULLY TIGHTEN THROTTLE BODY BRACKET See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation
8. CONNECT ENGINE ROOM MAIN WIRE See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation
9. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Air Cleaner Housing/Service and Repair/Installation
10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY
11. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
12. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
13. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
14. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
15. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
16. ADD ENGINE COOLANT See: Fluids/Coolant/Service and Repair
17. INSPECT FOR ENGINE COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
18. INSTALL NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
19. INSTALL ENGINE UNDER COVER ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation