Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-975002.png)
19. REMOVE RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR See: Engine, Cooling and Exhaust/Cooling
System/Radiator/Service and Repair/Removal and Replacement/Removal
20. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
21. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
22. REMOVE COMPRESSOR AND MAGNETIC CLUTCH
23. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
(b) Remove the bolt and crankshaft position sensor.
