Highlander 4WD V6-3.5L (2GR-FE) (2008)
(a) Disconnect the ECM connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (ECM MAIN WIRE)
OK -- REPLACE ECM
8. CHECK FOR SHORT IN CAN BUS WIRES (YAW RATE SENSOR BRANCH WIRE)
(a) Disconnect the yaw rate sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance: