Highlander 4WD V6-3.5L (2GR-FE) (2008)
(b) Disconnect the 19 connectors [B].
(c) Disconnect the 2 clamps [C].
(d) Disconnect the 2 studs [D].
16. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
(a) Exhaust side:
(1) Remove the bolt and camshaft timing oil control valve assembly.
(2) Remove the O-ring from the camshaft timing oil control valve assembly.
(b) Intake side:
(1) Remove the bolt and camshaft timing oil control valve assembly.
(2) Remove the O-ring from the camshaft timing oil control valve assembly.
17. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
(a) Exhaust side:
(1) Remove the bolt and camshaft timing oil control valve assembly.
(2) Remove the O-ring from the camshaft timing oil control valve assembly.