Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-1113001.png)
Canister Purge Control Valve: Service and Repair
Removal
2GR-FE EMISSION CONTROL: PURGE VALVE: REMOVAL
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE PURGE VSV
(a) Disconnect the 2 vacuum hoses and purge VSV connector.
(b) Disconnect the wire harness clamp.
(c) Remove the bolt and purge VSV.
