Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-18006.png)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
12. CHECK HARNESS AND CONNECTOR (NO.2 JUNCTION RELAY - NO. 1 JUNCTION RELAY)
(a) Disconnect the O34 and O33 connectors.
Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
13. CHECK HARNESS AND CONNECTOR (NO. 1 JUNCTION RELAY - MAIN BODY ECU)
(a) Disconnect the O33 and D7 connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
