Highlander 4WD V6-3.5L (2GR-FE) (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization
2. REMOVE ROOF HEADLINING ASSEMBLY
HINT: Refer to the instructions for REMOVAL of the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal.
3. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Remove the bolt.
(b) Disconnect the connector and remove the tire pressure warning receiver assembly.