Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-232002.png)
Removal
BRAKE CONTROL: FRONT SPEED SENSOR: REMOVAL
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The following procedures is for the LH side.
-
If the sensor rotor needs to be replaced, replace it together with the front drive outboard joint shaft assembly.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
