Highlander 4WD V6-3.5L (2GR-FE) (2008)
25. REMOVE SIDE TRIM COVER RH (for Manual Air Conditioning System) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
26. REMOVE REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System) See: Cabin Temperature Sensor / Switch/Service
and Repair/Room Temperature Sensor (for Rear)/Removal
27. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
28. REMOVE ROPE HOOK ASSEMBLY (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
29. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
30. REMOVE FRONT DECK SIDE TRIM COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
31. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
32. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
33. REMOVE COOLER PLATE See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Rear Cooling Unit/Removal
34. REMOVE NO. 1 COOLER AIR DUCT See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Rear Cooling
Unit/Removal
35. REMOVE REAR NO. 5 AIR DUCT See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Rear Cooling
Unit/Removal
36. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR
(a) Disconnect the 3 connectors.
(b) Disengage the clamp.
(c) Disengage the claw and remove the rear evaporator temperature sensor.
Installation
AIR CONDITIONING: REAR EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL REAR EVAPORATOR TEMPERATURE SENSOR