toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 1115 > < Components|Page 1113
Page 1
background image

Knock Sensor: Service and Repair
Removal

2GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine Assembly/Removal

                 

2. REMOVE NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

3. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair

                 

4. DISCHARGE FUEL SYSTEM PRESSURE See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and

Repair/Removal

                 

5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH 

                 

6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH 

                 

7. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY 

                 

8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY 

                 

9. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY 

                 

10. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air

Cleaner Housing/Service and Repair/Removal

                 

12. DISCONNECT ENGINE ROOM MAIN WIRE See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

13. REMOVE THROTTLE BODY BRACKET See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

14. REMOVE NO. 1 SURGE TANK STAY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

15. REMOVE INTAKE AIR SURGE TANK ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

16. REMOVE NO. 2 ENGINE MOUNTING STAY RH See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

17. DISCONNECT FUEL MAIN TUBE See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

18. REMOVE INTAKE MANIFOLD See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

19. REMOVE KNOCK CONTROL SENSOR

Components|Page 1115 > < Components|Page 1113