Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-438003.png)
(a) Disconnect the ignition switch connector.
(b) Disengage the 2 claws and remove the ignition switch.
Installation
2GR-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
(a) Engage the 2 claws to install the ignition switch.
(b) Connect the ignition switch connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Installation
