Highlander 4WD V6-3.5L (2GR-FE) (2008)
Alternator: Service and Repair
Disassembly
2GR-FE CHARGING: GENERATOR: DISASSEMBLY
DISASSEMBLY
1. REMOVE GENERATOR CLUTCH PULLEY
(a) Using a screwdriver, remove the generator pulley cap.
(b) Set SST (A) and (B).
SST: 09820-63020
(c) Clamp SST (A) in a vise.
NOTE: Be sure to fix the flat surface of SST (A) in a vise.
(d) Place the rotor shaft end into SST (A).
(e) Fit SST (B) to the clutch pulley.