Highlander 4WD V6-3.5L (2GR-FE) (2008)
/Page-1600002.png)
OTHER SYSTEM: POWER OUTLET SOCKET: REMOVAL
REMOVAL
1. REMOVE POWER OUTLET SOCKET BEZEL See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE REAR POWER POINT SOCKET ASSEMBLY
(a) Disengage the 2 claws and remove the rear power point socket assembly.
Installation
OTHER SYSTEM: POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL REAR POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws and install the rear power point socket assembly.
2. INSTALL POWER OUTLET SOCKET BEZEL See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
