Highlander 4WD V6-3.5L (2GR-FE) (2008)
OTHER SYSTEM: CENTER POWER OUTLET SOCKET: REMOVAL
REMOVAL
1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) See: Body and Frame/Interior Moulding
/ Trim/Dashboard / Instrument Panel/Service and Repair/Removal
2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal
4. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the claw and remove the power outlet socket assembly.
5. REMOVE CENTER POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the center power outlet socket cover.
Installation
OTHER SYSTEM: CENTER POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL CENTER POWER OUTLET SOCKET COVER
(a) Engage the 2 claws and install the center power outlet socket cover.
2. INSTALL POWER OUTLET SOCKET ASSEMBLY