Highlander 4WD V6-3.5L (2GR-FE) (2008)
(b) Turn the steering wheel to the left and right full lock positions, and measure the turning angle.
Wheel turning angle:
If the angles are not as specified, check and adjust the right and left rack end lengths.
4. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION
(a) Install the camber-caster-kingpin gauge or place the front wheels on the center of the wheel alignment tester.
(b) Inspect the camber, caster and steering axis inclination.
Camber, caster and steering axis inclination:
5. ADJUST CAMBER
NOTE: Inspect toe-in after the camber has been adjusted.
(a) Remove the front wheel.
(b) Remove the 2 nuts on the lower side of the front shock absorber.
NOTE: Keep the bolts inserted.
(c) Clean the installation surfaces of the front shock absorber and the steering knuckle.
(d) Temporarily install the 2 nuts (Step A).