Highlander 4WD V6-3.5L (2GR-FE) (2008)
Front Cross-Member: Service and Repair
Installation
SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION
INSTALLATION
1. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
(a) Temporarily install a new front suspension member body mounting rear cushion LH while confirming the installation direction.
NOTE: Position the front suspension member body mounting rear cushion in the correct direction.
(b) Install SST as shown in the illustration.
SST: 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
(c) Using SST, install the front suspension member body mounting rear cushion LH as shown in the illustration.
NOTE: Check that there is no clearance between the front suspension member and the front suspension member body mounting rear cushion
LH.
2. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
(a) Temporarily install a new front suspension member body mounting rear cushion RH while confirming the installation direction.
NOTE: Position the front suspension member body mounting rear cushion in the correct direction.