Highlander 4WD V6-3.5L (2GR-FE) (2008)
Repair/Removal
4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
5. REMOVE REAR MAT See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
6. REMOVE DECK TRIM SERVICE HOLE COVER
7. REMOVE LOWER SPARE WHEEL CARRIER HINGE COVER (w/ Cover)
8. REMOVE SPARE TIRE
9. REMOVE SPARE WHEEL CARRIER LOCK COVER (w/ Cover)
10. REMOVE REAR WHEELS
11. REMOVE TAIL EXHAUST PIPE ASSEMBLY
12. REMOVE REAR STABILIZER LINK ASSEMBLY LH
(a) Remove the nut and separate the rear stabilizer link assembly LH from the rear stabilizer bar.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
(b) Remove the nut and the rear stabilizer link assembly LH from the rear shock absorber with coil spring LH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
13. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
14. REMOVE REAR STABILIZER BAR BRACKET LH (for Rear Side)
(a) Remove the 2 bolts and the rear stabilizer bar bracket LH (rear side).
15. REMOVE REAR STABILIZER BAR BRACKET RH (for Rear Side)
(a) Remove the 2 bolts and the rear stabilizer bar bracket RH (rear side).
16. REMOVE REAR STABILIZER BUSHING (for LH Side)