Highlander 4WD V6-3.5L (2GR-FE) (2008)
Shifter A/T: Testing and Inspection
U151F Automatic Transaxle
Inspection
U151F AUTOMATIC TRANSAXLE: SHIFT LEVER: INSPECTION
INSPECTION
1. INSPECT SHIFT LOCK CONTROL ECU (w/ Smart Key System)
(a) Disconnect the shift lock control ECU connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
2. INSPECT SHIFT LOCK CONTROL ECU (w/o Smart Key System)