Highlander 4WD V6-3.5L (2GR-FE) (2008)
(d) Using SST, remove the rear flange.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04010
09955-04061
09957-04010
09957-04010
(e) Remove the No. 2 center support bearing assembly and washer.
4. REMOVE NO. 1 CENTER SUPPORT BEARING ASSEMBLY
(a) Place matchmarks on the front flange and intermediate shaft.
(b) Using SST and a hammer, unstake the staked part of the nut.
SST: 09930-00010
(c) Using SST to hold the front flange, remove the nut and plate washer.
SST: 09330-00021