Highlander 4WD V6-3.5L (2GR-FE) (2008)
Drive/Propeller Shaft: Service Precautions
DRIVE SHAFT: DRIVE SHAFT SYSTEM: PRECAUTION
PRECAUTION
1. NOTICE OF REMOVING AND INSTALLING FRONT DRIVE SHAFT ASSEMBLY RH
(a) When removing and installing the front drive shaft assembly RH in a 4WD vehicle, be sure to first drain all the transaxle oil and transfer oil. If
removal and installation are carried out without draining these oils, the transfer oil will flow into the transaxle side. Extensive cleaning will be
required if the two oils mix.