Highlander 4WD V6-3.5L (2GR-FE) (2008)
B. Apply a small amount of MP grease No.2 to the oil seal lip.
3. Install the transfer ring gear mounting case washer No.2 to the RH bearing retainer.
4. Install the center differential case tapered roller bearing.
Using the SST and a press install the outer race to the RH bearing retainer.
SST PIN 09950-60010 (09951-00620), 09950-70010 (09951-07150)
5. Install the 0-rings.
A. Apply Hypoid gear oil to the two NEW 0-rings.
B. Install the two (2) 0-rings to the RH bearing retainer.
NOTICE
Be careful NOT to twist the 0-ring and fit it into the retainer's groove properly.
6. Install the transfer RH bearing retainer sub-assembly.