Highlander 4WD V6-3.5L (2GR-FE) (2008)
B. Install the transfer assembly to the transaxle assembly with the 2 bolts and 6 nuts.
Torque: 69 N*m (700 kgf*cm, 51 ft*lbf)
NOTICE
^
Check that the gasket is installed to the transfer assembly before instaling it to the transaxle assembly.
^
Install the transfer assembly to the transaxle assembly without tilting.
^
When moving the transfer assembly, do NOT hold by the oil seals.
11. Install the automatic transmission w/transfer.
Refer to TIS applicable model and model year Repair Manual:
12. Install the engine assembly with transaxle.