Highlander 4WD V6-3.5L (2GR-FE) (2008)
Windshield Washer Spray Nozzle: Service and Repair
Removal
WIPER AND WASHER: WASHER NOZZLE: REMOVAL
REMOVAL
1. REMOVE WASHER NOZZLE SUB-ASSEMBLY
(a) Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
NOTE: Be careful not to damage the windshield.
HINT: Tape the screwdriver tip before use.
(b) Remove the washer nozzle sub-assembly from the washer hose.
NOTE: Washer nozzles cannot be reused.