Highlander 4WD V6-3.5L (2GR-FXE) Hybrid (2011)
_hybrid/Page-105002.png)
Reference
^
After cycling the ignition switch to the "IG-ON" mode, the Low Tire Pressure Warning Light will blink for 1 minute and then remain illuminated
until all the tire pressure warning valves/sensors are activated.
^
The Diagnostic Trouble Codes (DTCs) listed below are stored in the TPWS ECU until the tire pressure warning valves/sensors are activated.
^
The multi-information display will read "Check Tire Pressure System".
^
The "Check Tire Pressure System" on the multi-information display will disappear when the tire pressure warning valves/sensors are activated.
^
The DTCs will automatically clear when the tire pressure warning valves/sensors are activated.
Activation Procedure
1. Connect TIS Techstream.
