Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
2.
Remove the front seat back board as shown in the illustration.
3.
Remove the seat armrest assembly. Using a screwdriver, remove the cap.
NOTE:
Tape the screwdriver tip before use to prevent scratches (or damage) to the seat.
4.
Remove front seat back assembly.
A.
Remove the hog rings with pliers and disengage the seat back cover hook.
B.
Remove the 4 bolts and front seat back assembly.
C.
Disconnect the connectors (power seat adjust and side airbag).
5.
Remove the front seat back spring assembly.
A.
Remove the hog rings.