Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
e. Using SST, disconnect the 2 brake lines from the master cylinder, then remove the 2 brake lines.
SST 09023-00100
f.
Disconnect the actuator connector.
g. Remove the 3 nuts and brake actuator with bracket.
4. REMOVE ABS & TRACTION ACTUATOR ASSY
a. Remove the 2 nuts and ABS & TRACTION actuator from the bracket.
b. Remove the 2 holders and 3 cushions from the actuator.
5. REMOVE BRAKE ACTUATOR BRACKET ASSY
a. Remove the tube clamp bolt from the bottom side of the actuator bracket.
b. Remove the 4 bolts and brake actuator bracket.
6. INSTALL BRAKE ACTUATOR BRACKET ASSY
a. Install the brake actuator bracket with the 4 bolts.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)