Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS and TRAC Actuator
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
2. REMOVE AIR CLEANER ASSEMBLY WITH HOSE
3. REMOVE ABS & TRACTION ACTUATOR ASSY WITH BRACKET
a. Slide the clip and disconnect the actuator No. 1 hose from the actuator.
b. Disconnect the master cylinder pressure sensor connector and harness clamp.
c. Using SST, disconnect the 6 brake lines from the actuator.
SST 09023-00100
d. Use tags or make a memo to identify the place to reconnect.