Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
(d) Turn the crankshaft 2/3 of a revolution (240°), and check only the valves indicated in the illustration.
(1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Valve clearance (Cold):
Intake 0.15 - 0.25 mm (0.006 - 0.010 in.)
Exhaust 0.25- 0.35 mm (0.010 - 0.014 in.)
(2) Record out-of-specification valve clearance measurements. They will be used later to determine the required replacement adjusting shim.
(e) Turn the crankshaft 2/3 of a revolution (240°), and check only the valves indicated in the illustration.
(1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Valve clearance (Cold):
Intake 0.15- 0.25 mm (0.006 - 0.010 in.)
Exhaust 0.25- 0.35 mm (0.010 - 0.014 in.)
(2) Record out-of-specification valve clearance measurements. They will be used later to determine the required replacement adjusting shim.
12. ADJUST VALVE CLEARANCE