Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
/Page-889003.png)
A.
Use the measurement made in 1 (F) to determine the amount of adjustment necessary to the tie rod ends.
B.
The direction of adjustment is shown.
3.
Adjust steering angle.
A.
Lift up the vehicle.
B.
Draw a line on the RH and LH tie rod and rack ends where it can easily be seen.
C.
Measure the distance from RH and LH tie rod ends to the rack end screws.
NOTE:
^
Measure the RH side and LH side.
^
Make a note of the measured values.
D.
Remove the RH and LH boot clips from the rack boots.
E.
Loosen the RH and LH lock nuts.
