Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
Shift Interlock Solenoid: Testing and Inspection
KEY INTER LOCK SOLENOID INSPECTION
1. INSPECT KEY INTERLOCK SOLENOID
a. Disconnect the solenoid connector.
b. Connect KLS+ (4) terminal to the batteries' positive (+) terminal, and KLS- (3) terminal to the battery negative (-) terminal, and apply about
12V between KLS+ - KLS- terminals. Check that operation noise can be heard from the solenoid.
If the solenoid does not operate, replace the solenoid.