Landcruiser V8-4.7L (2UZ-FE) (2000)
/Page-1422006.png)
a. Remove the bolt.
b. Using a screwdriver, remove the overhead console box,then disconnect the connector.
HINT: Tape the screwdriver tip before use.
28. w/o Sliding roof:
REMOVE OVERHEAD CONSOLE BOX
a. Remove the bolt.
b. Using a screwdriver, remove the map light assembly, then disconnect the connector.
c. Using a screwdriver, remove the 2 lenses.
HINT: Tape the screwdriver tip before use.
d. Remove the 4 bolts.
e. Using a screwdriver, remove the overhead console box, then disconnect the connector.
