Landcruiser V8-4.7L (2UZ-FE) (2000)
/Page-360005.png)
Install Driver's Side Crossmember Frame Damper Weight
No. 4 Crossmember Damper
Weight Installation
1.
Check Bolt Hole.
A.
Check the 2 bolt holes located in the LH frame rail. If there are weld nuts, go to step 2-H.
B.
Check the 2 bolt holes located in the LH frame rail. If there are NO weld nuts, go to step 2-A.
2.
Install No. 4 Crossmember Damper Weight.
A.
Insert the wires into each bolt hole of the frame, and pull out the wires from hole "A."
