Landcruiser V8-4.7L (2UZ-FE) (2000)
/Page-1272001.png)
Cabin Temperature Sensor / Switch: Testing and Inspection
Room Temperature Sensor (Auto A/C)
INSPECTION
1. REMOVE ROOM TEMPERATURE SENSOR
a. Remove the lower No.1 panel set screw.
b. Release the lower No.1 panel set claws.
c. Disconnect the connector and aspirator hose.
d. Remove the screw and sensor.
2. INSPECT ROOM TEMPERATURE SENSOR CIRCUIT
3. INSTALL ROOM TEMPERATURE SENSOR
a. Install the sensor to the lower No.1 panel with the screw.
b. Connect the aspirator hose and connector.
c. Install the lower No.1 panel with the screw.
