Landcruiser V8-4.7L (2UZ-FE) (2000)
/Page-619001.png)
Crankshaft Position Sensor: Description and Operation
Crankshaft Position Sensor
The crankshaft position sensor, which detects the engine speed and crankshaft angle signal (NE signal), has been installed on the oil pump body.The NE
signal plate has 34 teeth.
The NE signal sensor generates 34 signals at every engine revolution. The ECM detects the standard crankshaft angle based on the G signal, and the
actual crankshaft angle and the engine speed by the NE signal.
