Landcruiser V8-4.7L (2UZ-FE) (2000)
Camshaft Position Sensor: Testing and Inspection
INSPECT CAMSHAFT POSITION SENSOR
a. Remove the V-bank cover.
b. Disconnect the camshaft position sensor connector.
c. Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 835 - 1,400 ohms
Hot: 1,060 - 1,645 ohms
If the resistance is not as specified, replace me camshaft position sensor.
d. Reconnect the camshaft position sensor connector.
e. Reinstall the V-bank cover.