toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Collision / Non-Collision Inspections|Page 4857 > < Collision / Non-Collision Inspections
Page 2
background image

around when the new steering wheel pad is installed on the steering wheel.

CAUTION:  be sure to follow the correct procedure for removal and installation of the steering wheel pad, steering system.

3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED

a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the steering wheel pad (with airbag) removed from the vehicle.

Check the damage on the spiral cable connector and wire harness.

HINT:  There should be no interference between the steering wheel pad and steering wheel, and the clearance should be uniform all the way
around when the new steering wheel pad is installed on the steering wheel.

Collision / Non-Collision Inspections|Page 4857 > < Collision / Non-Collision Inspections