Landcruiser V8-4.7L (2UZ-FE) (2000)
/Page-214001.png)
Ignition Switch: Component Tests and General Diagnostics
INSPECTION
1. INSPECT IGNITION SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
2. INSPECT IGNITION KEY ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the indicator light lights up.
If operation is not as specified, replace the switch.
3. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY
If continuity is not as specified, replace the switch. Connect the switch connector and inspect the connector on wire harness side from the back
side, as shown.
