Landcruiser V8-4.7L (2UZ-FE) (2000)
7. REMOVE DIFFERENTIAL CARRIER ASSEMBLY
a. Remove the 10 nuts, washers and differential carrier assembly.
NOTICE: Be careful not to damage the installation surface.
Torque: 72 Nm (740 kgf-cm, 53 ft. lbs.)
b. Remove the gasket.
INSTALLATION
Installation Is in the reverse order of removal.
HINT: After installation, fill the differential with hypoid gear oil for LSD, fill the brake reservoir with brake fluid, bleed the brake system, check for
leaks and check the ABS speed sensor signal.
Overhaul