toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Body > < Diagram Information and Instructions|Page 1092
Page 1
background image

Cold Start Injector Time Switch: Testing and Inspection

INSPECTION OF START INJECTOR TIME SWITCH

INSPECT RESISTANCE OF COLD START INJECTOR TIME SWITCH.

Using an ohmmeter, measure the resistance between each terminal

STA - STJ

30 - 50 ohms below 15°C (59°F)
70 - 90 ohms above 30°C (86°F) 

STA-Ground

30-9O ohms

If the resistance is not as specified, replace the switch.

Throttle Body > < Diagram Information and Instructions|Page 1092