Landcruiser 4WD L6-3955cc 4.0L OHV (3F-E) (1988)
B.
REPLACEMENT OF SEAT BELT RETRACTOR COVER
6.
Remove toothed washer, bush, plain washer, spring washer and bolt from the seat belt.
7.
Remove the original retractor cover.
*Note:
If it is difficult to
remove the cover from the tongue plate, break the original cover, being careful to avoid damaging the seat belt.
8.
Install the new cover and guide on the original retractor, be sure to assemble the washers and bolts in their original positions.
C INSTALLATION OF SEAT BELT
1.
Install the seat belt in reverse order of removal procedure.