Landcruiser 4WD L6-3955cc 4.0L OHV (3F-E) (1988)
2.
Tightening torque of bolt B for the seat belt is 32 ft.lb.
D.
INSTALLATION OF HOOK
When reinstalling the upper seat back trim plate, also install the left and right hand hooks.
E.
AFFIXING LABEL
Clean the trim to ensure good adhesion and affix the belt use instruction label in the following location (rear RH side door).
F.
PRECAUTIONS
*Before locking rear seat cushion, place the outboard seat belts on the hooks on top of the seat back and put other belts in a pocket on the lower
center of the seat back to keep the seat belt from slipping under the seat. (After locking the rear seat cushion, remove the outboard seat belts from
the hooks and the other seat belts from the pockets.)