toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/T - Fluid Level Checking Conditions|Page 1161 > < Diagram Information and Instructions|Page 1154
Page 1
background image

Fluid - A/T: Technical Service Bulletins
A/T - Fluid Level Checking Conditions

REFERENCE:

Transmission & Clutch

NUMBER:

006

DATE:

02-12-88

MODEL:

Land Cruiser (FJ)
TITLE     

AUTOMATIC TRANSMISSION FLUID LEVEL - 1988 LAND CRUISER

In order to obtain an accurate automatic transmission fluid (ATF) level on 1988 Land Cruisers, the transmission must be in "Park" and at normal
operating temperature (160~ - 170~ F).

Inspection of ATF level when the transmission is cold may indicate a low or empty ATF condition. Adding additional and unnecessary ATF at this time
may cause overfilling, overheating and possible transmission damage.

Therefore, do not add additional ATF fluid based on readings taken at cool transmission temperatures.

ATF LEVEL INSPECTION
Note:

In the event that ATF is required (such as during normal recommended service intervals), be sure to use Dexron II.

A/T - Fluid Level Checking Conditions|Page 1161 > < Diagram Information and Instructions|Page 1154