Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
^
Pull the seat track/seat back cushion mount assembly away from the seat frame and set aside (see illustration).
INSTALL PLASTIC TUBE COVER:
^
Slide the plastic tube over drive shaft and re-attach the seat track/seat back cushion mount assembly to the seat frame (see illustration).
RE-ASSEMBLE SEAT COMPONENTS:
^
Re-assemble the seat components in reverse order and be sure to confirm the following:
A.
Connecting rod and "E" clip are assembled on the link pin
B.
Seat tracks are properly bolted and torqued to the seat frame
C.
Both vertical rods (front and rear) and 4 vertical rod holding brackets are assembled properly