Landcruiser 4WD L6-4.5L (1FZ-FE) (1993)
Knock Sensor: Testing and Inspection
INSPECTION
1. Remove knock sensor.
-
Disconnect the knock sensor connector.
-
Using SST, remove the knock sensor (SST 09816-30010).
2. Using an ohmmeter, check that there is no continuity between the terminal and body.
-
If there is continuity, replace the sensor.
3. Reinstall knock sensor.
-
Using SST, install the knock sensor. SST 09816-30010
Torque: 44 Nm (33 ft lb)
-
Connect the knock sensor connector.