Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
/Page-1256001.png)
Ignition Cable: Service and Repair
Installation
HIGH-TENSION CORDS INSTALLATION
1. Reconnect high-tension cords to distributor cap and ignition coil.
(a) Assemble the holder and grommet.
HINT: Connect the high-tension cords to the distributor cap as shown in the illustration.
(b) Align the spline of the distributor (ignition coil) with the spline of the holder. and push in the cord.
NOTICE: Check that the holder is correctly installed to the grommet and distributor cap as shown in the illustration.
