Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
Seat Belt Buckle Switch: Testing and Inspection
INSPECT BUCKLE SWITCH
1. Check that there is continuity between terminals with the switch ON (belt unfastened).
2. Check that there is no continuity between terminals with the switch OFF (belt fastened).
If operation is not as specified, replace the seat belt inner.
INSPECT RELAY CIRCUIT
Disconnect the connector from the relay and inspect the connector on the wire harness side, as shown in the chart.
If circuit is as specified. try another relay.
If the circuit is not as specified, refer to Meter Circuit wiring diagram and inspect the circuits connected to other parts.